How to iron trousers so that arrows are flawless

Shooters are worn by schoolchildren, students, businessmen, officials, business women and managers, police and lawyers, party leaders and office workers. Therefore, the question of how to perfectly iron this garment after washing is very relevant.

Do you know where the arrows on the trousers come from? More than two centuries ago, when the conveyor sewing production began to develop, trousers were sent in huge containers around the world. They were packed so compactly that they came to customers with a packed fold in the form of arrows.

Gentlemen and their ladies did not rack their brains over how easy it is to iron the arrows on their trousers. They left as they were and this element signaled that the thing is new, only acquired. This was considered a sign of affluence and was fashionable.

Where to start: 3 recommendations

Ironed pants often come with arrows, but they can be removed. It is ideal to iron the arrows on the trousers so that they hold for a long time will help the iron and ironing board. Gauze or a thin cotton cloth and water spray are also useful. The following three recommendations will help to cope with the further task of five plus.

1. We determine the temperature. Look at the label: it indicates what temperature is acceptable for this fabric. Compliance with the rule will help to get beautifully ironed trousers without shine at the exit.
2. Cooking tools. The ironing board should be perfectly smooth and always in the case. You can use a flat table surface, previously covered with a lint-free dense fabric. The sole of the iron should be clean, without traces of scale and carbon deposits.
3. We do a "test" for cleanliness. Clean the product from lint and pet hair. Check for stains after washing. When heated, even a little pollution can become more noticeable.

How to iron pants with arrows: 2 steps

Having prepared everything you need, proceed to ironing. Some claim that the best effect is achieved if you iron your trouser legs through a newspaper. Forever forget about this method, otherwise spoil the thing - under the influence of temperature, printing ink will be printed on it. Moreover, you cannot start work immediately with the arrows, otherwise you will not be able to tidy the upper part of the trousers. The work must be performed in two stages: first, the trousers are ironed from the wrong side, and only then “from the face”.

On the wrong side

Before making the arrows on the trousers with an iron, turn the thing on the wrong side and iron it whole starting from the belt. Consider the following points.

Pockets Place a blank sheet of paper under the pockets. This will avoid creases on the front side, which then straighten will be problematic.

Side seams. After stroking your pockets, go with an iron over your trousers, paying attention to the fact that the canvas remains flat, without wrinkles. Pay particular attention to the side seams, especially around the upper thighs. To smooth this area, you can "put on" pants on the side of the ironer.

Front side

Turn the trousers to the front side and start creating arrows using the following three-step instruction.

1. Jointing. Carefully unfold the product so that the outer and inner seams are precisely aligned. Any divergence of seams even by 0.5 cm will “lead” the arrow to the side.
2. Jerked movements. Be sure to iron with gauze. Take a piece of cloth, soak it, squeeze it well and lay on the leg. Set the iron temperature regulator to the desired mark, as indicated on the label, and start driving the appliance over the entire surface of the leg. Handle the area of ​​the supposed arrows carefully - the slightest shift of the fabric will “break” the arrow. Do not drive back and forth. Better tear off the iron from the surface and apply to the fabric, again tear off and apply again. So less likely that the material will move.
3. Rule of Priority. With the arrow on one side, repeat the procedure on the other. In the same way, step by step with the second leg. If you only learn how to iron trousers correctly, do not iron both legs at the same time - only experienced housewives can do this “aerobatics”.

If it turned out bad: working on bugs

You managed to smooth the arrows on the trousers at home, but upon closer examination, you noticed that not everything is as smooth as we would like. Do not panic: two common mistakes can be fixed as follows.

1. Delete the arrows. If you are dissatisfied with the result of ironing: the arrows “broke”, strayed from the intended course - do not worry, they are easy to eliminate. Dampen gauze in a solution of 9% vinegar (two tablespoons per liter of water) and strip the trousers from the inside. Then recreate the smooth arrows.
2. Get rid of the gloss. It does not matter if after the procedure there are shiny spots on the clothes. Get rid of them by soaping the problem areas with soap and soaking for ten minutes. Wash, rinse and dry the item in the sun.

10 tricks of experienced housewives

Experienced housewives on the forums share personal secrets on how to iron classic pants with arrows. Use the following 10 recommendations to make the process faster and more efficient.

1. Additional clamp. To prevent the fabric from moving during ironing, you can fix it on top and bottom by tailor pins. Just to get started, check to see if they leave marks on the fabric - pin the needle onto an inconspicuous area of ​​the trousers. For the same purpose, it is convenient to use stationery clips - just grab them on the top and bottom of the leg.
2. Only through the fabric. Without gauze, it is impossible to point arrows on trousers, otherwise, if synthetic fibers are present in the composition, unnecessary gloss will appear on the clothes.
3. We fix the effect. In water for wetting gauze, you can add vinegar in a dosage of a tablespoon per liter of water. Reception helps to make the arrows sharper, fix for a longer time. In addition, the solution helps to get rid of the gloss on the legs.
4. The beginning is from the middle. The arrows will be smoother if you start ironing from the middle of the leg, that is, in the knees.
5. Soap for long-playing shooters. The effect of straight arrows will last longer if you draw a vertical line in this area on the wrong side with a laundry soap slightly moistened with water.
6. So that the pants do not crumple. After ironing, allow the hands to dry by placing them on the ironing board or on the bar for trousers.
7. Spray against gloss. Regularly spray dried gauze or cloth through which to iron your trousers with spray water. Ironing "dry" is fraught with shiny spots.
8. Seams without prints. When smoothing the upper part of trousers, where usually many seams pass, you can put a small pillow, which is likely to be at home, or a folded towel. This will avoid imprinting seams.
9. Comb as a ruler. To outline future arrows, you can use an ordinary comb. Moisten and then stretch the trousers between the teeth along the entire length.
10. Look at the shortcut. If you see an icon on the trouser label that shows a crossed-out iron with steam, it is forbidden to use a steamer to iron this item.

If it was not possible the first time to perfectly iron men's trousers with arrows, do not be discouraged - continue to study strictly according to the instructions. Each time it will turn out better and better, and the process will take less and less time.
Well, if this wisdom has not obeyed you over the years, you can use the method of creative housewives. They believe that you can quickly and correctly iron pants with arrows ... under the mattress. Having folded the thing in half along and connecting the side and step seams, spread them under the mattress and go to bed. In the morning, the advisers assure you, find perfectly straight trousers.