How to clean a burnt pot to shine: recipes for different types of coatings

To understand how to quickly remove heavy soot from the bottom of the pan, determine the type of material it is made of. It is from this, in the first place, that we will build on the selection of a cleaning method.

We put in order enameled dishes

Housewives love enameled pans for the fact that they are inexpensive, harmoniously fit into the interior of the kitchen, have high consumer properties compared to other materials. Importantly, such utensils are considered one of the safest for the human body, because the food does not come in contact with metal (made from rolled steel), but with an enamel coating applied in two layers.

Three tips if an enameled pan or pan is very burnt.

1. Act fast. The result depends on it. The more you delay with cleaning, the higher the likelihood that nondescript yellow-brown spots will remain inside the container.
2. Do not fill the hot pot with cold water. A sudden temperature drop is harmful to enamel. It may crack, or even crack. Once the dishes have cooled slightly, pour water at room temperature into it.
3. Be careful. Vitreous enamel (this is the professional name for enamel coating) requires the most delicate care. If you decide to clean the enameled pan from burnt food, please note that the use of coarse metal brushes and abrasive cleaning agents is strictly contraindicated.

There are some nuances when choosing detergent mixtures. It is quite possible to do without special household chemicals, and to prepare a suitable composition at home from improvised means. So how to wipe away the burned utensils? For enameled products, the following cleaning methods are suitable.

Salt

Features Salt is an excellent adsorbent. And at the same time - a delicate abrasive. Therefore, its application is quite logical.

What to do

1. Tightly fill the bottom with salt.
2. Moisturize with water.
3. Leave the pan for a couple of hours.
4. We take a sponge and wipe away soot under a hot stream.
5. If traces still remain, repeat the salt procedure, but with boiling.
6. We’ll prepare the salt composition right inside the pan: five to six tablespoons with a slide of salt per liter of water.
7. Bring the solution to a boil.
8. On medium heat, “boil” the pan for 30-40 minutes.

Soda

Features If the pollution is not too serious, just apply baking soda to the sponge and gently clean the stick. And here is a recipe to remove complex stains. Carefully check hardness of soot. If necessary, increase the boiling time and add water. Follow the procedure with the window open.

What to do

1. Pour a strong soda solution into the pan (for a liter and a half of water we take a glass of baking soda).
2. Leave for the night.
3. In the morning, boil this mixture for half an hour.
4. Leave to cool completely.
5. Remove the loose coating with a sponge and rinse thoroughly.

Vinegar

Features Vinegar is not only useful for removing rusty stains, stains and limescale. He also copes with burnt food with a bang.

What to do

1. Fill the burnt enameled bottom with ordinary vinegar.
2. We stand from 30 minutes to two to three hours, the time depends on the degree of soot.
3. Then wash the pan with detergent.
4. Rinse well with clean water.

Activated carbon

Features Activated charcoal will help if traces of burnt milk are left in your enameled pan.

What to do

1. Grind a handful of black tablets.
2. We fall asleep carbon.
3. After 30 minutes, fill the pan with warm water.
4. After another hour and a half, I wash the dishes as usual.

Whiteness

Features If the enamel is clouded, there are spots from the cleaned soot, the following recipe will help whiten the enameled pan inside.

What to do

1. Mix two or three bags of citric acid and two large spoons with a slide of baking soda.
2. Add 100 ml of whiteness (commonly known as bleach).
3. Stir well and pour a liter of water.
4. Boil the mixture for about half an hour.
5. Drain the cooled liquid, rinse thoroughly with a washcloth.
6. We collect fresh water and boil again to remove odor and residues.

How to wash a burnt aluminum pan

Aluminum pans are practical, lightweight and quickly heat up. And since aluminum is a rather soft metal, it requires a special attitude and delicate care. The following remedies will do.

Soda and salt

Features In order not to scratch the surface of the metal, we choose soft abrasives - soda and salt.

What to do

• We take equally soda and salt.
• We fill them with soot.
• Pour a little warm water (to the consistency of the slurry).
• After a day, remove the product and pour a liter of water into the pan.
• Boil for half an hour.
• In my traditional way.

Lemon acid

Features This method is good because it does not require physical effort from the hostess. The acid will “corrode” the soot and you just have to remove it with a soft sponge.

What to do

1. We collect as much water as it takes to cover the soot.
2. Pour two large tablespoons of citric acid.
3. Boil for 15 minutes.
4. After cooling, clean in the usual way.

Sour fruit

Features Green apples and lemon will help remove dark plaque from an aluminum pan. They have fruit acids - we need them.

What to do

1. Grind acidic fruits: lemon or apple.
2. Wrap gruel in gauze.
3. We rub the inner surface of the utensils and leave for at least 40 minutes.
4. After clean the usual balm for dishes and a soft sponge.

Silicate glue

Features Silicate glue is widely used in everyday life.If a pan of aluminum has burned, you can safely take the following recipe into service.

What to do

1. You will need a bucket of boiling water. We dilute in it 100 g of silicate glue and soda ash.
2. Bring the composition to a boil.
3. Put the burnt pan in a bucket and boil it for half an hour.
4. Then clean the inside and outside of the dishes with a sponge.

Remove carbon from stainless steel

Stainless steel cookware - unpretentious and does not require special care. It can be safely cleaned with a metal washcloth, alkaline products, acidic compounds, and powdered substances. Try to avoid sharp objects and rough scrapers.

A stainless steel pan is considered the best for making jam. It is in such containers that the full value of the fruits will be preserved, and the acid from the berries will not affect the quality of the dishes. It happens that sugar syrup sticks to the bottom and sticks to the walls, solidifying with caramel. Even worse - when the jam burns, spoils the dishes, and the fruit becomes unusable. You can wash a burnt out stainless steel pan with gel for dishes or with the help of such folk remedies:

• baking soda;
• table vinegar;
• lemon or tomato juice;
• salt;
• activated carbon;
• coffee grounds;
• laundry soap.

Prepare cleaning mixtures according to the above recipes. Any of them is suitable for stainless steel. Especially if the procedure is accompanied by boiling.

Universal ways to descale ...

Features With frequent boiling of water in the pan, the bottom and walls are surrounded by a solid white coating. Citric acid will help get rid of scale in the pan without spoiling any enamel or aluminum.

What to do

1. Pour a bag of citric acid into the pan and fill it with water.
2. We boil the solution for 30 minutes.
3. We pour out the water.
4. Remove the entire coating with a sponge.
5. Rinse the pan well.

... and black plaque

Features If you are unable to cope with persistent burnt spots and black soot, then there is an effective way to clean the burned pan from black to shine, which is suitable for any type of coating.

What to do

1. In four liters of boiling water, we dilute a tablespoon of PVA glue and shavings of laundry soap (a third of a piece).
2. Fill a dirty pan with a cleaning solution.
3. Boil for at least 30 minutes.
4. Remove black plaque with a washcloth.
5. We wash off the remnants of the product well.

There are dozens of folk tips on how and how to clean a burnt pot. But if you do not have enough time to soak and boil dirty dishes, then just buy a tool designed specifically for removing carbon deposits. Be sure to read the instructions and features of use on different types of coatings before use.