The toilet clogged: how to clean it yourself using household chemicals, soda, vinegar and mechanical devices

If the toilet is clogged, apartment owners prefer to call plumbing. But sometimes this service is temporarily unavailable or too expensive. What to do in this case? After all, you can do without water, gas, electricity. But without a toilet, to withstand the day will not work. In this case, you have to take on cleaning the toilet yourself. There are several ways to cope with this task.

How to clean a clogged toilet from clogging: 4 recommendations

There are many reasons that can lead to clogging of the sewer. This may be improper operation of the toilet: throwing garbage into it, waste after repair or cat stuff. But sometimes the sewage system gets clogged even without the "help" of the owners. Neighbors can also contribute. And sometimes clogging occurs due to poor-quality, too hard water, which provides a gradual deposition on plaque pipes. Then there is an urgent need to figure out how to clean the toilet yourself if it clogged. Before disassembling effective methods of cleaning the sewer, it is necessary to dwell on the four tips of the masters.

1. Find out the cause of the congestion. The solution to the problem must begin by asking all family members about the possible source of the problem. For example, a child may accidentally drop a toy into the toilet. In this case, half of the effective methods will be ineffective. To cope with such a congestion, if the subject is far enough, only the cable will help.
2. Determine the location of the cork. If the water leaves the toilet badly, what do the novice owners decide right away? They suggest that the congestion arose precisely in the toilet pipe and apply all available methods for cleaning it. This approach is not entirely correct. After all, congestion could occur much further in the sewer pipe. To approximately determine the location of the cork, you must open the taps in the bathroom and in the kitchen. If the water drains normally and does not linger in the pipe, then the problem is really in the plexus of the toilet. But if the water quickly filled the pipe and very slowly leaves the sink, then the problem is quite serious, and it is better to use the services of a plumber.
3. Do not use the tank. To check how the water leaves or to clean the pipes “under pressure” do not use a drain tank. If the congestion in the toilet is too powerful, then all the water mixed with sewage can pour through the toilet directly onto the floor. Another unpleasant phenomenon is also possible. A bath and a toilet are two communicating vessels. Therefore, dirty water, which is unable to eliminate congestion, there is only one thing - to flood the bath. It is better to drain the water from the pelvis, strictly controlling the process of its outflow.
4. Urgently call plumbing. In some situations, even knowing how to clean the toilet, if it is clogged, it will not be possible to achieve a positive result. If, when you open the toilet, you notice that the water level is gradually increasing, this means that the mash formed in the common riser. In this case, the communicating vessels will be your toilet and sewer.Needless to say, that very soon all sewage will overflow and fill the toilet? No cleaning measures can solve the problem. Only a plumber can cope with this cork using special inspection hatches and a plumbing cable.

Folk remedies to help. Cleaning the toilet

How to remove blockage in the toilet? If no one threw any foreign objects into the toilet, then ordinary home remedies can come to the rescue. They will be invaluable in the formation of congestion from rust, urinary stone, fat deposits and deposits. The most common and effective are such folk remedies.

• Lemon acid. It qualitatively eliminates urinary stone and plaque on the pipes. It is recommended to put three tablespoons of citric acid in the toilet. In this condition, the plumbing is left for three to four hours. Then the closet is cleaned with a brush and flushed down the water. A pleasant bonus of such an event will be freshness in the toilet room.
• Soda. If possible, scoop up water from the toilet. Then soda is poured into it. It will take about 250 g (half a pack). In this form, plumbing is left overnight (no less than eight hours). Then carefully drain the water, if necessary, help with a brush. Cleansing with soda will not only help eliminate plaque, but also whiten the toilet.
• Vinegar. To get rid of congestion, you need a 9% product. A liter of vinegar must be heated. Warm liquid is poured into the toilet bowl, with previously scooped up water, and left for three to four hours. With a rough sponge or a brush, carefully clean the accessible surface. Then carefully rinse with water.
• Soda with vinegar. If individually these products did not bring the desired result, then you can try to eliminate the congestion by combining soda with vinegar. Water needs to be scooped out of the toilet. Pour 250 g of soda into the drain. Then pour a glass of vinegar into it. Get ready to hiss. After 15 minutes, when the "perturbation" of soda is over, pour half a liter of very hot water into the toilet. But remember that you can not use boiling water, otherwise the porcelain toilet may not withstand temperature extremes. This tool will relieve plaque and eliminate the fat plug if food residues are often poured into the toilet.
• Hydrochloric acid. It acts very aggressively, therefore it is used only in extreme cases. But it is hydrochloric acid that is able to dissolve the congestion formed by the cat's filler. It is necessary to pour a little liquid into the toilet and leave it for one hour. Then you can try to wash off the water. But if the sewer pipes are made of plastic, then hydrochloric acid is prohibited. She will eat the pipes.

Chemical agents from congestion

Manufacturers have developed many chemical compounds that can dissolve plugs formed in pipes. Their main advantage over traditional methods is the speed of exposure. Typically, effective cleaning occurs 15-20 minutes after using the selected reagent. The following products can be used to clean the toilet from clogging.

• "Mole". A budget tool that can efficiently clean pipes. It contains caustic soda and surfactant components. This combination provides the dissolution of fats, solid waste, such as fish scales, hair. Mole is produced in the form of a powder and gel.The tool can be used for steel and cast iron pipes. But for plastic counterparts, some varieties of the "Mole" are strictly prohibited.
• Vortex Draft. This cleaner is available in liquid form. Effective dissolution of congestion is provided by active chlorine, caustic soda and surfactant components. The drug is able to cope with heavy biowaste and fat accumulations. It can be applied to any pipes.
• "Bugs Pothan." This is an expensive option that eliminates even the most serious blockages. But the reagent also has a negative quality. This substance contains alkali, therefore, it can worsen the condition of the pipes. Given this aggressive effect, it is not recommended to use the “Bug Pothan” for worn-out plumbing. And one should not resort to his help too often.
• "Mister Muscle". This product is in the form of a powder or gel. It has a mild effect and should not be counted on to eliminate serious congestion. Mr. Muscle can handle minor traffic jams in just a couple of minutes. But if the congestion is more serious, it is recommended to pour the product into the toilet and leave it overnight.
• "Tireth." The preparation is based on chlorine bleach, surfactants and sodium hypochlorite. The tool can be used for both metal and plastic pipes. Effectively cleans congestion, eliminates unpleasant odors and has a disinfecting ability.

Mechanical cleaning methods

If it is not possible to clean the blockage in the toilet using folk or chemical means on your own, then you can resort to mechanical cleaning. The procedure is carried out manually or using such "assistants" as a plunger and a plumbing cable.

Hands

What to do if the toilet is clogged with foreign objects: toys, rags, large grocery cleanings? Before removing the blockage in the toilet, it is necessary to examine the emergency site manually. Putting on gloves, four steps are taken in sequence.

1. Scoop out water from the toilet.
2. Dip your hand into the drain and try to find a foreign object.
3. Finger clogs soft blockages and carefully pull out of the toilet.
4. Farther and denser objects are pulled out with a wire with a hook at the end.

Plunger

When the cause of the clogging has not been identified, and the water is still able to seep, it is recommended to use a plunger to clean the toilet. The effectiveness of cleansing depends on the right "assistant". On sale you can find several varieties of plungers.

• Cup-shaped. This is a simple model. It is designed to eliminate small congestion. A cup-shaped plunger will help clean the sink. But in the case of congestion in the toilet, this remedy is ineffective.
• Taper. This model is able to eliminate congestion in the toilet. A dense rubber nozzle with a conical shape ensures proper entry into the drain hole.
• Pneumatic. The most advanced model with great power. The plunger is equipped with a nozzle capable of “maneuvering” inside the pipe.

The procedure for cleaning the toilet with a plunger is quite simple and includes the following three steps.

1. The rubber nozzle is placed on the drain hole so that the plunger completely covers it.
2. For pumping out, several light pressures are made (the rubber suction cup should “engage” with the hole).
3. At this point, sharply pull the handle, and tear off the nozzle from the drain hole.

Water hammer at this technique provides for cleansing of the cork formed by newsprint, fine cleaning or other debris.

Plastic bottle

How can I break a toilet without a plunger at home? If the necessary device is not in the household, then you can try to create hydraulics using a regular plastic bottle. The purification process is carried out in four stages.

1. The bottom of the bottle is carefully cut.
2. Screw the cap tightly onto the rest.
3. The cut-off plastic bottle is placed on the drain hole.
4. Holding onto the top with a lid, try to create a water hammer like using a plunger.

Plumbing cable

Such an event is used in the most extreme cases, when it is not possible to remove the cork by any of the above methods. In the event of a blockage of the sewage system with construction waste (sand, clay, putty), cat filler, they resort to the help of a plumbing cable. The auger (cable) is a steel flexible "snake", with which you can reach the most inaccessible sections of the sewer. It is equipped with a special handle that provides cable rotation. To clean the toilet, seven steps are performed sequentially.

1. The plumbing cable is lowered into the drain hole.
2. Slowly push the cable through the bends of the toilet.
3. The cable is carefully rotated so that it passes freely through the pipes.
4. When the auger rests, they begin to rotate it, winding garbage.
5. The cable with the hooked “load” is carefully pulled out of the toilet.
6. After cleaning the screw, it is re-launched into the sewer pipe.
7. Repeat until the mash is completely eliminated.

Cleaning the toilet at home is easy. But this procedure can hardly be called pleasant. In order not to resort to the need to clean the toilet, experienced owners recommend that preventive measures be taken. To do this, from time to time it is necessary to clean the toilet with soda and vinegar. In this case, plaque and dirt will not accumulate, and the toilet will always be snow-white and fresh.