How to tie a man’s tie in the office, on a friendly party and on a celebration

A tie emphasizes the status of its owner. By the way, it was for this reason that a piece of fabric of a special shape and color was worn in ancient Egypt and China. It used to be that there were only 85 ways to tie an accessory, but recently researched they came to the conclusion that there are more than 177 thousand techniques! To master complex nodes, you need to learn how to perfectly tighten the simplest. Button the top button of the shirt, raise the collar up and proceed in six steps.

1. Lay the ends of the accessory on top of each other at the level of the jugular cavity. (The longer one should be on top).
2. Pry the long edge under the short.
3. Long wrap the short one again from the outside.
4. Bring the long end up to the base of the knot towards the chin and pull it out from the inside.
5. Pass the long edge into the loop from the outside.
6. Tighten the assembly as necessary.

Windsor

1. Put the tie on the neck so that its wide part hangs more narrow.
2. Fold the sides so that the wide one is on top and facing left.
3. Pass from the inside and get out in the area of ​​the jugular cavity.
4. Lower the wide part to the narrow, take it to the left. From the inside, pass under the narrow part and on the right from the outside, bring to the neck, pass inward.
5. From the inside, take the wide part to the left and wrap the narrow part from above.
6. Bring the wide part inward and remove it from the jugular cavity.
7. Now thread the wide edge through the loop on the outside.
8. Pass the wide part into the formed outer loop and align the edges of the large inverted triangle.
9. Tighten the tie as necessary.
10. A small crease forms under the knot. Carefully level it, if necessary, slightly release the lower (narrow) part of the triangle.

Dual windsor

1. Lay the wide edge (long side) over the narrow (short side), lead inward, and then remove it from the jugular cavity.
2. Perform the same loop again, pointing in the same direction and leading out from the inside at the neck.
3. Lower the wide side to the rib cage and wrap the narrow one in the place where the double knot is formed.
4. Bring the wide part inward and out at the jugular cavity.
5. From the outside, thread into the formed loop.
6. Tighten as necessary. Align the edges.

Van wake

1. Lower the right half lower than the left by at least 10 cm.
2. Cross the “tails” so that the right one is on top.
3. Make the first turn - wrap the long part around the short part from the outside. Take it out again.
4. Slightly lower the long part, wrap again over the first knot.
5. Repeat the manipulation, wrapping the long end once again on top of the first and second nodes.
6. Bring the long edge down and push it out at the jugular cavity.
7. Pass the long half through all three loops.
8. Tighten as necessary.
9. Make sure that the nodes are not too tight, straighten their edges so that they form three consecutive lines.

Eldridge

1. Put the tie on the neck so that the wide end is on the right and is slightly longer than the narrow one.
2. Do not move the wide half to the side. It should lie on the chest in a straight line.
3. You need to knit a knot with the left narrow end. Cross the tie, leading the narrow end to the right end, wrap around.
4. Next, lead a narrow half from the outside to the neck. Wrap it in and out from the inside on the right side of the assembly.
5. With a narrow end, wrap a wide one on the outside at the base of the assembly. Wrap it in and out at the jugular cavity.
6. Now, from the outside, lower the working half and take it to the right. Wrap it with a wide half on the inside and pass it into a formed loop on the right outside.
7. Tighten the loop as necessary. Wrap the narrow edge inward along the right edge of the knot.
8. Wrap the base on the right side of the assembly with a narrow edge. Wrap the narrow end inward and pull it to the left.
9. Narrow side wrap the base on the left side of the corner. Pass into the resulting loop.
10. Slide the narrow end inward at the base of the knot. Pass into the loop from the inside.

Neck scarves

Men's neckerchief gives the image a special sophistication and respectability. This accessory is recommended for men who prefer a classic style in clothes. If a tie or bow tie is more suitable for business meetings and special occasions, then the scarf can be tied in an informal setting.

• Lightweight scarf. It is easier to work with a scarf than with a regular tie. If this thin fabric is plain or with a fine pattern, then just wrap it around the neck and draw one end of the scarf through the other. If the accessory complements the shirt, it is better to unfasten one button of the collar, and tuck the ends of the scarf inside.
• Volume scarf. If the fabric is dense, then the knot scarf can not be fixed. Such accessories are usually worn in cool weather. Wrap a scarf around the neck, one end should be longer. Move the long end behind your back and wrap it around your neck. Tuck both ends under the collar of outerwear or sweaters.
• Bright summer scarf. It can be folded in width two or even four times and wrapped around the neck with a clear line, tucking the edges under the shirt collar.
• Scarves in the color scheme of the costume. If you pick up a scarf a few tones darker than a shirt and a color that matches the costume’s fabric, you can fill it over a shirt under a jacket in the manner of a kimono. As a rule, such scarves are wide and long.Fold it in width twice exactly in the center, wrap around the neck and lay the edges on top of each other.

Children's option

A school tie is usually worn with an elastic band. It is enough to fix it once, and then wear it, hiding the elastic under the collar. To create such a design, proceed in five steps.

1. Lay the accessory on a table or other flat surface face down and narrow side up. Conditionally divide it into two halves and put an elastic band three centimeters up from the center.
2. Lower the narrow part down. Wrap left side up.
3. Turn the narrow part to the right and wrap the narrow end of the tie under the elastic. On both sides we get two loops.
4. Tighten the knot slightly, aligning its edges.
5. From the inside, grab a thread of the same color.

Female option

The neckerchief fits quite harmoniously into the wardrobe of the fair sex, adding a twist to the business style. On it, you can tie simple tie knots or experiment.

Scheme "Lush knot"

1. Put the scarf on the neck, both ends should be the same length, they do not need to be displaced.
2. Gather both ends of the scarf with your fingers at the base of the neck and thread one into the other.
3. Tie one knot, but do not overtighten.
4. Flatten one end of the scarf and put it forward.

Scheme "Stylish Scarf"

1. Take a rectangular scarf, folded in half, in both palms. Put on the neck, crossing at the back.
2. Pull both ends of the headscarf forward.
3. Lower them and a couple of sentiments down from the main line of the scarf, tie a simple knot.
4. Spread the knot and straighten the edges of the scarf.

Shawls of medium size from light summer fabrics allow you to create a beautiful short tie. Since the fabric is thin, it is easy to fold, it is quite possible to tie a simple knot, like on a men's accessory, and wide edges as much as possible to straighten.