How to clean the washing machine from mold How to wash and remove fungus and smell from rubber, products, cleaning with whiteness

It’s hard to imagine your life without a washing machine. It makes life so easy (loaded - unloaded the machine, and no more efforts) that any trouble with the machine is perceived as a real tragedy. And especially if mold appeared in it, which is a danger to the human body. Will you have to throw away the washing machine? Do not take hasty steps. Estimate the scale of the disaster first. Perhaps the fungus has only recently appeared, and it can be washed off with a soap solution and a brush. Are things more serious? There are effective folk remedies that can even get rid of stubborn mold.

Why did the fungus “settle”

The fact that the black mold settled in the machine, the mistresses are to blame. Unsuspecting themselves, they “invite” the fungus. How does this happen? Everything is simple. Most dirt is trapped in the cuff, where water constantly collects. A combination of causes contributes to the appearance of mold.

• “Short cold” wash. The express program at low temperatures is the favorite mode of housewives who want to save money. However, if the temperature is always low, disinfection of the household appliance does not occur. Upon overheating (from 60 ° C), the mold disappears, while low temperatures, on the contrary, create favorable conditions for the colony of the fungus.
• The absence of bleaching agents in the powder. Such substances are chemically active. They not only return the radiant whiteness to things, but also prevent the fungus from spreading. It is easier for housewives to buy one powder (universal) than to have in reserve a remedy with whitening properties. But such a powder must necessarily be in the house: and not just stand unopened, and at times go into action.
• Use rinse aid without additional rinsing. If you use a fabric softener, but do not include an additional rinse, you will soon have to think about how to clean the washing machine from mold. From a poorly rinsed softener, a mucous deposit remains on the walls of the washer. Under such conditions, the fungus quickly creates new colonies.
• Dampness. It appears if you do not rinse and dry the powder tank, do not wipe the gum dry, and do not dry the machine.

How to get rid of mold in a washing machine: methods with proven effectiveness

The fungus can and must be fought. Even a hint of him should not be in the house, because such a neighborhood is dangerous to human health. Fungal spores:

• cause allergic reactions;
• weaken the immune system;
• open the way to various infections.

In addition, mold provokes the appearance of an unpleasant odor in the machine, which is also transmitted to washed things. Therefore, it will be necessary to deal with “uninvited guests” who have settled in the typewriter, since clothes after washing will smell of damp and musty.

For difficult cases

Features To remove the fungus from the rubber in the washing machine, you need to understand that he does not like. Mud cleaning is carried out by special means. And it’s better to influence everyone right away. Mildew is “uncomfortable” in contact with acids, when exposed to high temperatures and if dry. Apply three strokes at once to the fungus and it will disappear.

Instruction manual

1. Pour a liter of Whiteness into the powder dispenser.
2. Start the longest washing mode, having previously set the maximum temperature.
3. In the middle of the cycle, suspend the operation of the machine for an hour and a half. Resume the program and let it end.
4. At the end, pour 9-11% vinegar into the measuring tank. It takes about two glasses. Turn on the rinse program.
5. Wipe the gum and drum dry.
6. Remove the container and dry it.
7. Keep the door open for a couple of days so that the “unit” is ventilated.

This method allows you to clean the washing machine from mold and odor, even if everything is running, and black dot traces spread throughout the entire inner surface. However, remember that mold can return to its habitable place: whether this happens or not depends on the subsequent proper care of the equipment.

The method with citric acid

Features There is a way to clean the washing machine from the smell of mold with citric acid. It will help if there are few traces of mold. The method should be addressed if the fungus is not visible, but there is a distinct smell of musty. The acid can also be used for prophylaxis: “drive off” a machine with lemon remedy every four to six months.

Instruction manual

1. Wash and thoroughly dry the “powder” tray and place under it.
2. Pour 200 g of citric acid into it.
3. Launch the wash (one of the long modes, maximum temperature).
4. Wipe the "insides" of the machine, do not forget about the gum. Leave to air.

"Grandma's" method: how soda will help

Features To fight the fungus in the house, our grandmothers used soda solution. Such a “helper” is in every kitchen, and the method itself does not require much effort. Soda gruel will help to wash mold in the washing machine and in the powder compartment, clean the gum from the fungus, if there are few “lesions”. This method allows you to remove mustiness: the unique properties of sodium bicarbonate to absorb the most corrosive odors are known.

Instruction manual

1. Mix two to three tablespoons of soda with water. It should be a thick gruel.
2. Using an old toothbrush or sponge, apply slurry to the affected area.
3. Leave for half an hour.
4. Launch without washing.
5. To enhance the effect, you can add a tablespoon of washing powder to the tank.

We use toilet liquid

Features This method allows you to get rid of mold if there is no special “chemistry” in the house, and folk methods did not help. An alternative to a specialized mold cleaner for a washing machine is a detergent designed for cleaning toilets. It is designed specifically to combat various microorganisms, plus it effectively removes unpleasant odors. In addition, for sure, such a disinfectant liquid is in your home.

Instruction manual

1. Wear rubber gloves before washing mold in the washing machine.
2. Apply the product with a sponge to the places inside the seal where the mold is located.
3. Leave on for five to ten minutes.
4. Wipe the treated gum thoroughly.
5. Launch an “empty” wash.

Avoiding Repetition: 5 Tips

If you manage to get rid of the mold, this does not mean that it can not return. Do not give her a single chance. How to do it?

1. Wipe clean. You should be in the habit of wiping the drum, seal, all rubber parts after each wash. Do not forget that dryness is the enemy of mold.
2. Ventilate. The powder tank must be removed at the end of the wash, washed thoroughly and left to dry. The doors of the machine must be kept open so that the drum is ventilated.
3. Do not leave laundry. The wash is over - take out your clothes. Do not leave wet laundry in the machine: moisture creates excellent conditions for the fungus. You should also not store dirty things in the drum: this also leads to the appearance of microorganisms and an unpleasant odor in the machine.
4. Do not abuse the air conditioner. It is not necessary to pour the rinse aid in excess, it is poorly washed, creating a favorable environment for mold, and in large quantities it will be even more difficult to wash the conditioner. Always turn on rinse aid when using rinse aid.
5. Perform prophylaxis. Every month it is recommended to start the “empty” wash in boiling mode. For such cases, buy a powder with a whitening effect. At least once every six months, clean the machine with citric acid or acetic solution.

It is impossible to remove mold in the washing machine and prevent its further appearance if the filter and hoses are not cleaned every six months: a fungus likes to settle on these parts. It is better to call a wizard who will show how to properly clean these parts of the washing machine. And after that you can repeat the procedure yourself.